Toilet Installation, Backed by a 1-Year Warranty
Main Drain Mechanical is a Red Seal plumbing and mechanical company serving homeowners, strata property managers, and general contractors across the Lower Mainland. Toilet installation services are a core part of the plumbing work the company handles — done by the same licensed, insured, WorkSafeBC-covered technicians who show up on every job, not a dispatched crew. With over 25 years of combined experience and a 1-year workmanship warranty behind every installation, whether it’s a standard two-piece toilet, a one-piece toilet, or a smart toilet installation with electronic features, if a new toilet is on your list, this is the call to make.
When a Toilet Has to Come Out, and Nothing Goes Smoothly
You’ve either got a leak that’s tracked its way under the floor, a unit that rocks every time someone sits on it, or you’re mid-renovation and the old toilet needs to go before the new flooring can go down. Simple enough on paper. But the moment you start pulling it, you realize the flange is cracked, the shutoff valve hasn’t moved in fifteen years, or the floor underneath is soft in a way it definitely shouldn’t be. What started as a straightforward toilet replacement has now stalled the whole job. And if you’re managing a strata suite or a rental unit, every hour it sits unfinished is an hour a tenant is without a working bathroom.
Main Drain Mechanical Handles Toilet Installation Services
Toilet installation isn’t just unbolting the old unit and setting down the new one, it’s checking the flange condition, verifying the rough-in measurement, testing the shutoff valve, and making sure the seal seats correctly before anything gets bolted down. As a toilet installation company, Main Drain Mechanical’s Red Seal-certified plumbers work through every step properly, whether it’s a standard new toilet installation, a two-piece toilet, or a one-piece unit, which is why the job holds and why every toilet installation we complete is backed by a 1-year workmanship warranty.
How We Approach Your Toilet Installation
Every installation follows the same standard, whether it’s residential toilet installation for a single-family home, a strata suite, or commercial toilet installation as part of a renovation mid-project:
- We treat the flange as the real risk, not the toilet. A cracked or low flange is what actually causes a future leak, and toilet flange repair gets handled the moment we find it — not left as a problem for later.
- A rough-in measurement isn’t a formality to us. A mismatched rough-in is how a “quick swap” turns into redone work, so we verify it against your new unit before anything gets committed to.
- A shutoff valve that hasn’t been touched in years is a liability we won’t ignore. We’d rather deal with it during the install than get called back after the floor’s already finished.
- The wax ring gets matched to your flange height, not grabbed off the shelf. Slow toilet leaks almost always trace back to the wrong seal for the setup — getting that right is the entire point of hiring a licensed Red Seal plumber over a guess.
- Nothing gets called finished until flush, fill, and base all hold. A weeping connection two days later means it wasn’t actually tested, just assumed.
- What we document is as much for you as it is for us. Strata property managers get a written record because “trust us, it’s fine” isn’t documentation.
Our Process
What’s Included in a Toilet Installation Service!
Every new toilet installation covers the same physical scope, whether it’s a two-piece toilet, a one-piece unit, or a straightforward swap as part of a full renovation, carried out by a WorkSafeBC-covered crew. Here’s what actually goes into the job.
- The toilet bowl and tank, set and bolted to the floor: leveled and secured so there’s no rock or shift once it’s anchored.
- A new wax ring or seal: a fresh seal every time, never reused, matched to the flange height on your specific setup.
- Closet bolts and floor bolt caps: new hardware, not whatever came off the old unit.
- A new supply line: connecting the shutoff valve to the fill valve, sized correctly for the fixture.
- The fill valve and flush valve inside the tank: installed and adjusted so the flush and refill cycle both run properly from day one.
- The seat and lid: installed and torqued correctly, whether it’s the one you supplied or one we source.
- Caulking at the base, where applicable: a clean finish seal around the base once everything’s confirmed dry and level.
- Disposal of the old toilet and packaging: nothing left behind for you to deal with.
What Toilet Installation Costs
Toilet installation pricing in the Lower Mainland follows a straightforward structure, and knowing how it’s built helps you evaluate any quote fairly.
A standard swap for residential toilet installation; good flange, standard rough-in runs $260–$550 + GST. Larger scopes involving flange repair, a seized shutoff valve, or a smart toilet installation start at roughly $700–$1,200+ + GST depending on what’s involved. For strata buildings and commercial toilet installation across multiple units, pricing is scoped per unit and confirmed on-site before work begins.
The fastest way to get an accurate number is a quick call or message, we’ll give you an honest range before you commit to anything.